dmesg - Radeon RX Vega 56
Linux version 4.14.0-rc3-dc-next-okt15 (phoronix@phoronix-MS-7998) (gcc version 6.3.0 20170406 (Ubuntu 6.3.0-12ubuntu2)) #1 SMP Sun Oct 15 09:31:36 EDT 2017
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000009fdb8fff] usable
BIOS-e820: [mem 0x000000009fdb9000-0x000000009fdf3fff] ACPI data
BIOS-e820: [mem 0x000000009fdf4000-0x00000000a01a7fff] usable
BIOS-e820: [mem 0x00000000a01a8000-0x00000000a01a8fff] ACPI NVS
BIOS-e820: [mem 0x00000000a01a9000-0x00000000a01a9fff] reserved
BIOS-e820: [mem 0x00000000a01aa000-0x00000000aceacfff] usable
BIOS-e820: [mem 0x00000000acead000-0x00000000ae768fff] reserved
BIOS-e820: [mem 0x00000000ae769000-0x00000000ae77dfff] ACPI data
BIOS-e820: [mem 0x00000000ae77e000-0x00000000ae87dfff] usable
BIOS-e820: [mem 0x00000000ae87e000-0x00000000aeba5fff] ACPI NVS
BIOS-e820: [mem 0x00000000aeba6000-0x00000000af72dfff] reserved
BIOS-e820: [mem 0x00000000af72e000-0x00000000af7a1fff] type 20
BIOS-e820: [mem 0x00000000af7a2000-0x00000000af7fffff] usable
BIOS-e820: [mem 0x00000000af800000-0x00000000afffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000044effffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.60 by American Megatrends
efi: ACPI 2.0=0x9fdb9000 ACPI=0x9fdb9000 SMBIOS=0xaf68b000 SMBIOS 3.0=0xaf68a000 MPS=0xfcb20 ESRT=0xaaf82398
random: fast init done
SMBIOS 3.0.0 present.
DMI: System manufacturer System Product Name/PRIME Z370-A, BIOS 0420 10/19/2017
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x44f000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 7FC0000000 uncachable
1 base 00B0000000 mask 7FF0000000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: last_pfn = 0xaf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fce00-0x000fce0f] mapped at [fffffffffd240e00]
esrt: Reserving ESRT space from 0x00000000aaf82398 to 0x00000000aaf823d0.
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff92bd00095000] 95000 size 24576
Using GB pages for direct mapping
BRK [0x3bc91d000, 0x3bc91dfff] PGTABLE
BRK [0x3bc91e000, 0x3bc91efff] PGTABLE
BRK [0x3bc91f000, 0x3bc91ffff] PGTABLE
BRK [0x3bc920000, 0x3bc920fff] PGTABLE
BRK [0x3bc921000, 0x3bc921fff] PGTABLE
BRK [0x3bc922000, 0x3bc922fff] PGTABLE
BRK [0x3bc923000, 0x3bc923fff] PGTABLE
BRK [0x3bc924000, 0x3bc924fff] PGTABLE
BRK [0x3bc925000, 0x3bc925fff] PGTABLE
BRK [0x3bc926000, 0x3bc926fff] PGTABLE
BRK [0x3bc927000, 0x3bc927fff] PGTABLE
BRK [0x3bc928000, 0x3bc928fff] PGTABLE
Secure boot could not be determined
RAMDISK: [mem 0x329e5000-0x354e9fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000009FDB9000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000009FDB90A8 0000CC (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000009FDE6EB0 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000009FDB9210 02DC9C (v02 ALASKA A M I 01072009 INTL 20160422)
ACPI: FACS 0x00000000AEBA5F00 000040
ACPI: APIC 0x000000009FDE6FC8 0000F4 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000009FDE70C0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x000000009FDE7108 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: WSMT 0x000000009FDF3B68 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000009FDE7200 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: SSDT 0x000000009FDE7240 0003A3 (v01 SataRe SataTabl 00001000 INTL 20160422)
ACPI: SSDT 0x000000009FDE75E8 003043 (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
ACPI: SSDT 0x000000009FDEA630 002611 (v02 PegSsd PegSsdt 00001000 INTL 20160422)
ACPI: HPET 0x000000009FDECC48 000038 (v01 INTEL KBL 00000001 MSFT 0000005F)
ACPI: SSDT 0x000000009FDECC80 0011A2 (v02 INTEL Ther_Rvp 00001000 INTL 20160422)
ACPI: SSDT 0x000000009FDEDE28 000B13 (v02 INTEL xh_rvp08 00000000 INTL 20160422)
ACPI: UEFI 0x000000009FDEE940 000042 (v01 ALASKA A M I 00000002 01000013)
ACPI: SSDT 0x000000009FDEE988 0017AE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
ACPI: LPIT 0x000000009FDF0138 000094 (v01 INTEL KBL 00000000 MSFT 0000005F)
ACPI: SSDT 0x000000009FDF01D0 000141 (v02 INTEL HdaDsp 00000000 INTL 20160422)
ACPI: SSDT 0x000000009FDF0318 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
ACPI: SSDT 0x000000009FDF05B8 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
ACPI: SSDT 0x000000009FDF35C0 000517 (v02 INTEL TbtTypeC 00000000 INTL 20160422)
ACPI: DBGP 0x000000009FDF3AD8 000034 (v01 INTEL 00000002 MSFT 0000005F)
ACPI: DBG2 0x000000009FDF3B10 000054 (v00 INTEL 00000002 MSFT 0000005F)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000044effffff]
NODE_DATA(0) allocated [mem 0x44efd5000-0x44effffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000044effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x000000009fdb8fff]
node 0: [mem 0x000000009fdf4000-0x00000000a01a7fff]
node 0: [mem 0x00000000a01aa000-0x00000000aceacfff]
node 0: [mem 0x00000000ae77e000-0x00000000ae87dfff]
node 0: [mem 0x00000000af7a2000-0x00000000af7fffff]
node 0: [mem 0x0000000100000000-0x000000044effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000044effffff]
On node 0 totalpages: 4177771
DMA zone: 64 pages used for memmap
DMA zone: 27 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 11008 pages used for memmap
DMA32 zone: 704462 pages, LIFO batch:31
Normal zone: 54208 pages used for memmap
Normal zone: 3469312 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 12 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
PM: Registered nosave memory: [mem 0x9fdb9000-0x9fdf3fff]
PM: Registered nosave memory: [mem 0xa01a8000-0xa01a8fff]
PM: Registered nosave memory: [mem 0xa01a9000-0xa01a9fff]
PM: Registered nosave memory: [mem 0xacead000-0xae768fff]
PM: Registered nosave memory: [mem 0xae769000-0xae77dfff]
PM: Registered nosave memory: [mem 0xae87e000-0xaeba5fff]
PM: Registered nosave memory: [mem 0xaeba6000-0xaf72dfff]
PM: Registered nosave memory: [mem 0xaf72e000-0xaf7a1fff]
PM: Registered nosave memory: [mem 0xaf800000-0xafffffff]
PM: Registered nosave memory: [mem 0xb0000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xb0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
percpu: Embedded 39 pages/cpu @ffff92c13e200000 s119832 r8192 d31720 u262144
pcpu-alloc: s119832 r8192 d31720 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- --
Built 1 zonelists, mobility grouping on. Total pages: 4112464
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16103316K/16711084K available (9280K kernel code, 2467K rwdata, 3948K rodata, 2312K init, 2384K bss, 607768K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
ftrace: allocating 37649 entries in 148 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=12.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
NR_IRQS: 524544, nr_irqs: 2152, preallocated irqs: 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
tsc: Detected 3700.000 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7392.00 BogoMIPS (lpj=14784000)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170728
ACPI: 11 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 12 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 36K
smpboot: Max logical packages: 2
x2apic: IRQ remapping doesn't support X2APIC mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-8700K CPU @ 3.70GHz (family: 0x6, model: 0x9e, stepping: 0xa)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Hierarchical SRCU implementation.
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11
smp: Brought up 1 node, 12 CPUs
smpboot: Total of 12 processors activated (88716.94 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xa01a8000-0xa01a8fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0xae87e000-0xaeba5fff] (3309568 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 23:31:02, date: 11/06/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI Error: [_SB_.PCI0.RP05.PXSX] Namespace lookup failure, AE_NOT_FOUND (20170728/dswload2-191)
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20170728/psobject-252)
ACPI Error: Method parse/execution failed \_SB.PCI0.RP04.PXSX, AE_NOT_FOUND (20170728/psparse-550)
ACPI Error: [_SB_.PCI0.RP09.PXSX] Namespace lookup failure, AE_NOT_FOUND (20170728/dswload2-191)
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20170728/psobject-252)
ACPI Error: Method parse/execution failed \_SB.PCI0.RP08.PXSX, AE_NOT_FOUND (20170728/psparse-550)
ACPI: Executed 53 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF92C13B917000 00077A (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: \_PR_.PR00: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF92C13BA7A000 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF92C13DD32000 000D14 (v02 PmRef ApIst 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF92C13BA7EC00 00030A (v02 PmRef ApCst 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 7 GPEs in block 00 to 7F
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xb0000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:3ec2] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:a2af] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xdff30000-0xdff3ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:a2ba] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdff4d000-0xdff4dfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a282] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xdff48000-0xdff49fff]
pci 0000:00:17.0: reg 0x14: [mem 0xdff4c000-0xdff4c0ff]
pci 0000:00:17.0: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:17.0: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:17.0: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:17.0: reg 0x24: [mem 0xdff4b000-0xdff4b7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1b.0: [8086:a2e7] type 01 class 0x060400
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:a290] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:a294] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:a298] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:a2c9] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a2a1] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xdff44000-0xdff47fff]
pci 0000:00:1f.3: [8086:a2f0] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xdff40000-0xdff43fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xdff20000-0xdff2ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:a2a3] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xdff4a000-0xdff4a0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0xdff00000-0xdff1ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: [1022:1470] type 01 class 0x060400
pci 0000:01:00.0: reg 0x10: [mem 0xdfc00000-0xdfc03fff]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PCI bridge to [bus 01-03]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xdfb00000-0xdfcfffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
pci 0000:02:00.0: [1022:1471] type 01 class 0x060400
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PCI bridge to [bus 02-03]
pci 0000:01:00.0: bridge window [io 0xe000-0xefff]
pci 0000:01:00.0: bridge window [mem 0xdfb00000-0xdfbfffff]
pci 0000:01:00.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
pci 0000:03:00.0: [1002:687f] type 00 class 0x030000
pci 0000:03:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:03:00.0: reg 0x18: [mem 0xd0000000-0xd01fffff 64bit pref]
pci 0000:03:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:03:00.0: reg 0x24: [mem 0xdfb00000-0xdfb7ffff]
pci 0000:03:00.0: reg 0x30: [mem 0xdfb80000-0xdfb9ffff pref]
pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:03:00.1: [1002:aaf8] type 00 class 0x040300
pci 0000:03:00.1: reg 0x10: [mem 0xdfba0000-0xdfba3fff]
pci 0000:03:00.1: PME# supported from D1 D2 D3hot D3cold
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:02:00.0: bridge window [io 0xe000-0xefff]
pci 0000:02:00.0: bridge window [mem 0xdfb00000-0xdfbfffff]
pci 0000:02:00.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
pci 0000:04:00.0: [144d:a802] type 00 class 0x010802
pci 0000:04:00.0: reg 0x10: [mem 0xdfe10000-0xdfe13fff 64bit]
pci 0000:04:00.0: reg 0x18: [io 0xd000-0xd0ff]
pci 0000:04:00.0: reg 0x30: [mem 0xdfe00000-0xdfe0ffff pref]
pci 0000:00:1b.0: PCI bridge to [bus 04]
pci 0000:00:1b.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1b.0: bridge window [mem 0xdfe00000-0xdfefffff]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:06:00.0: [1b21:2142] type 00 class 0x0c0330
pci 0000:06:00.0: reg 0x10: [mem 0xdfd00000-0xdfd07fff 64bit]
pci 0000:06:00.0: enabling Extended Tags
pci 0000:06:00.0: PME# supported from D0
pci 0000:00:1c.4: PCI bridge to [bus 06]
pci 0000:00:1c.4: bridge window [mem 0xdfd00000-0xdfdfffff]
pci 0000:00:1d.0: PCI bridge to [bus 07]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
pci 0000:03:00.0: vgaarb: setting as boot VGA device
pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:03:00.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x9fdb9000-0x9fffffff]
e820: reserve RAM buffer [mem 0xa01a8000-0xa3ffffff]
e820: reserve RAM buffer [mem 0xacead000-0xafffffff]
e820: reserve RAM buffer [mem 0xae87e000-0xafffffff]
e820: reserve RAM buffer [mem 0xaf800000-0xafffffff]
e820: reserve RAM buffer [mem 0x44f000000-0x44fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0290-0x029f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 0 disabled]
pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:02: [io 0x0680-0x069f] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0x1800-0x18fe] has been reserved
system 00:02: [io 0x164e-0x164f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x0800-0x087f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:05: [io 0x1854-0x1857] has been reserved
system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:06: [mem 0xdffe0000-0xdfffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:07: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:07: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:07: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [io 0xfe00-0xfefe] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 10 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 05] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 05] add_size 200000 add_align 100000
pci 0000:00:1d.0: bridge window [io 0x1000-0x0fff] to [bus 07] add_size 1000
pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000 add_align 100000
pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff] to [bus 07] add_size 200000 add_align 100000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xb0000000-0xb01fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xb0200000-0xb03fffff 64bit pref]
pci 0000:00:1d.0: BAR 14: assigned [mem 0xb0400000-0xb05fffff]
pci 0000:00:1d.0: BAR 15: assigned [mem 0xb0600000-0xb07fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1d.0: BAR 13: assigned [io 0x3000-0x3fff]
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:02:00.0: bridge window [io 0xe000-0xefff]
pci 0000:02:00.0: bridge window [mem 0xdfb00000-0xdfbfffff]
pci 0000:02:00.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
pci 0000:01:00.0: PCI bridge to [bus 02-03]
pci 0000:01:00.0: bridge window [io 0xe000-0xefff]
pci 0000:01:00.0: bridge window [mem 0xdfb00000-0xdfbfffff]
pci 0000:01:00.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
pci 0000:00:01.0: PCI bridge to [bus 01-03]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xdfb00000-0xdfcfffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
pci 0000:00:1b.0: PCI bridge to [bus 04]
pci 0000:00:1b.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1b.0: bridge window [mem 0xdfe00000-0xdfefffff]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xb0000000-0xb01fffff]
pci 0000:00:1c.0: bridge window [mem 0xb0200000-0xb03fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 06]
pci 0000:00:1c.4: bridge window [mem 0xdfd00000-0xdfdfffff]
pci 0000:00:1d.0: PCI bridge to [bus 07]
pci 0000:00:1d.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1d.0: bridge window [mem 0xb0400000-0xb05fffff]
pci 0000:00:1d.0: bridge window [mem 0xb0600000-0xb07fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xb0000000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xdfb00000-0xdfcfffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xdfb00000-0xdfbfffff]
pci_bus 0000:02: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xdfb00000-0xdfbfffff]
pci_bus 0000:03: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xdfe00000-0xdfefffff]
pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:05: resource 1 [mem 0xb0000000-0xb01fffff]
pci_bus 0000:05: resource 2 [mem 0xb0200000-0xb03fffff 64bit pref]
pci_bus 0000:06: resource 1 [mem 0xdfd00000-0xdfdfffff]
pci_bus 0000:07: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:07: resource 1 [mem 0xb0400000-0xb05fffff]
pci_bus 0000:07: resource 2 [mem 0xb0600000-0xb07fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:03:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 44052K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x9bdb9000-0x9fdb9000] (64MB) mapped at [ffff92bd9bdb9000-ffff92bd9fdb8fff]
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a8d280fdb9, max_idle_ns: 881591151302 ns
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1510011062.532:1): state=initialized audit_enabled=0 res=1
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
pcieport 0000:00:1b.0: AER enabled with IRQ 120
pcieport 0000:00:1c.4: AER enabled with IRQ 121
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4.1 model 0x9E
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.14.0-rc3-dc-next-okt15 xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.14.0-rc3-dc-next-okt15 xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 3
pcieport 0000:00:1c.4: AER: Corrected error received: id=00e4
pcieport 0000:00:1c.4: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4(Receiver ID)
pcieport 0000:00:1c.4: device [8086:a294] error status/mask=00000001/00002000
pcieport 0000:00:1c.4: [ 0] Receiver Error (First)
xhci_hcd 0000:06:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x00000010
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.14.0-rc3-dc-next-okt15 xhci-hcd
usb usb3: SerialNumber: 0000:06:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.14.0-rc3-dc-next-okt15 xhci-hcd
usb usb4: SerialNumber: 0000:06:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.36.0-ioctl (2017-06-09) initialised: [email protected]
intel_pstate: Intel P-state driver initializing
intel_pstate: Disabling energy efficiency optimization
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: sig=0x906ea, pf=0x2, revision=0x6e
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (1784066279, 0)->(1843052819, -58986540)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: bc5f6243f3e92a61f40b9c38cb80c148573fdf31'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
Magic number: 9:400:554
clockevents clockevent5: hash matches
acpi PNP0C0F:05: hash matches
rtc_cmos 00:04: setting system clock to 2017-11-06 23:31:02 UTC (1510011062)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 2312K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 948K
Freeing unused kernel memory: 148K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
hidraw: raw HID events driver (C) Jiri Kosina
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
ahci 0000:00:17.0: version 3.0
nvme nvme0: pci function 0000:04:00.0
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
[drm] amdgpu kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
[drm] initializing kernel modesetting (VEGA10 0x1002:0x687F 0x1002:0x6B76 0xC3).
[drm] register mmio base: 0xDFB00000
[drm] register mmio size: 524288
[drm] probing gen 2 caps for device 1022:1471 = 700d03/e
[drm] probing mlw for device 1022:1471 = 700d03
[drm] UVD is enabled in VM mode
[drm] UVD ENC is enabled in VM mode
[drm] VCE enabled in VM mode
amdgpu 0000:03:00.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0xffff
ATOM BIOS: 113-D0500300-101
[drm] GPU post is not needed
[drm] vm size is 262144 GB, block size is 9-bit,fragment size is 9-bit
amdgpu 0000:03:00.0: VRAM: 8176M 0x000000F400000000 - 0x000000F5FEFFFFFF (8176M used)
amdgpu 0000:03:00.0: GTT: 256M 0x000000F5FF000000 - 0x000000F60EFFFFFF
[drm] Detected VRAM RAM=8176M, BAR=256M
[drm] RAM width 2048bits HBM
[TTM] Zone kernel: Available graphics memory: 8181272 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 8176M of VRAM memory ready
[drm] amdgpu: 8176M of GTT memory ready.
[drm] GART: num cpu pages 65536, num gpu pages 65536
[drm] PCIE GART of 256M enabled (table at 0x000000F400800000).
amdgpu 0000:03:00.0: amdgpu: using MSI.
[drm] amdgpu: irq initialized.
amdgpu: [powerplay] amdgpu: powerplay sw initialized
amdgpu 0000:03:00.0: fence driver on ring 0 use gpu addr 0x000000f5ff400040, cpu addr 0xffffb9b6c1fd5040
amdgpu 0000:03:00.0: fence driver on ring 1 use gpu addr 0x000000f5ff4000c0, cpu addr 0xffffb9b6c1fd50c0
amdgpu 0000:03:00.0: fence driver on ring 2 use gpu addr 0x000000f5ff400140, cpu addr 0xffffb9b6c1fd5140
amdgpu 0000:03:00.0: fence driver on ring 3 use gpu addr 0x000000f5ff4001c0, cpu addr 0xffffb9b6c1fd51c0
amdgpu 0000:03:00.0: fence driver on ring 4 use gpu addr 0x000000f5ff400240, cpu addr 0xffffb9b6c1fd5240
amdgpu 0000:03:00.0: fence driver on ring 5 use gpu addr 0x000000f5ff4002c0, cpu addr 0xffffb9b6c1fd52c0
amdgpu 0000:03:00.0: fence driver on ring 6 use gpu addr 0x000000f5ff400340, cpu addr 0xffffb9b6c1fd5340
amdgpu 0000:03:00.0: fence driver on ring 7 use gpu addr 0x000000f5ff4003c0, cpu addr 0xffffb9b6c1fd53c0
amdgpu 0000:03:00.0: fence driver on ring 8 use gpu addr 0x000000f5ff400440, cpu addr 0xffffb9b6c1fd5440
amdgpu 0000:03:00.0: fence driver on ring 9 use gpu addr 0x000000f5ff4004e0, cpu addr 0xffffb9b6c1fd54e0
[drm] use_doorbell being set to: [true]
amdgpu 0000:03:00.0: fence driver on ring 10 use gpu addr 0x000000f5ff400560, cpu addr 0xffffb9b6c1fd5560
[drm] use_doorbell being set to: [true]
amdgpu 0000:03:00.0: fence driver on ring 11 use gpu addr 0x000000f5ff4005e0, cpu addr 0xffffb9b6c1fd55e0
[drm] Found UVD firmware Version: 1.68 Family ID: 17
[drm] PSP loading UVD firmware
amdgpu 0000:03:00.0: fence driver on ring 12 use gpu addr 0x000000f4008faa60, cpu addr 0xffffb9b6c265aa60
amdgpu 0000:03:00.0: fence driver on ring 13 use gpu addr 0x000000f5ff4006e0, cpu addr 0xffffb9b6c1fd56e0
amdgpu 0000:03:00.0: fence driver on ring 14 use gpu addr 0x000000f5ff400760, cpu addr 0xffffb9b6c1fd5760
[drm] Found VCE firmware Version: 53.32 Binary ID: 4
[drm] PSP loading VCE firmware
amdgpu 0000:03:00.0: fence driver on ring 15 use gpu addr 0x000000f5ff4007e0, cpu addr 0xffffb9b6c1fd57e0
amdgpu 0000:03:00.0: fence driver on ring 16 use gpu addr 0x000000f5ff400860, cpu addr 0xffffb9b6c1fd5860
amdgpu 0000:03:00.0: fence driver on ring 17 use gpu addr 0x000000f5ff4008e0, cpu addr 0xffffb9b6c1fd58e0
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xdff4b000 port 0xdff4b100 irq 133
ata2: SATA max UDMA/133 abar m2048@0xdff4b000 port 0xdff4b180 irq 133
ata3: SATA max UDMA/133 abar m2048@0xdff4b000 port 0xdff4b200 irq 133
ata4: SATA max UDMA/133 abar m2048@0xdff4b000 port 0xdff4b280 irq 133
ata5: SATA max UDMA/133 abar m2048@0xdff4b000 port 0xdff4b300 irq 133
ata6: SATA max UDMA/133 abar m2048@0xdff4b000 port 0xdff4b380 irq 133
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
nvme0n1: p1 p2
usb 1-13: new high-speed USB device number 2 using xhci_hcd
usb 3-2: new full-speed USB device number 2 using xhci_hcd
e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
usb 1-13: New USB device found, idVendor=1a40, idProduct=0101
usb 1-13: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-13: Product: USB 2.0 Hub
hub 1-13:1.0: USB hub found
hub 1-13:1.0: 4 ports detected
ata2: SATA link down (SStatus 4 SControl 300)
ata6: SATA link down (SStatus 4 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) b0:6e:bf:30:44:6d
e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
ata3: SATA link down (SStatus 4 SControl 300)
ata4: SATA link down (SStatus 4 SControl 300)
e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
ata5: SATA link down (SStatus 4 SControl 300)
e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: ATA-10: Crucial_CT525MX300SSD1, M0CR040, max UDMA/133
ata1.00: 1025610768 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Crucial_CT525MX3 R040 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
ata1.00: Enabling discard_zeroes_data
sd 0:0:0:0: [sda] 1025610768 512-byte logical blocks: (525 GB/489 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata1.00: Enabling discard_zeroes_data
ata1.00: Enabling discard_zeroes_data
sd 0:0:0:0: [sda] Attached SCSI disk
[drm] DC: create_links: connectors_num: physical:4, virtual:0
[drm] Display Core initialized!
[drm] Rx Caps:
[drm] HBR2x4 pass VS=2, PE=1
[drm] DELL P2415Q: [Block 0]
[drm] DELL P2415Q: [Block 1]
[drm] dc_link_detect: manufacturer_id = AC10, product_id = A0BE, serial_number = 30344D4C, manufacture_week = 18, manufacture_year = 25, display_name = DELL P2415Q, speaker_flag = 1, audio_mode_count = 1
[drm] dc_link_detect: mode number = 0, format_code = 1, channel_count = 1, sample_rate = 31, sample_size = 7
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 9 succeeded in 3 usecs
[drm] ring test on 1 succeeded in 4 usecs
[drm] ring test on 2 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 2 usecs
[drm] ring test on 4 succeeded in 2 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] ring test on 6 succeeded in 2 usecs
[drm] ring test on 7 succeeded in 2 usecs
[drm] ring test on 8 succeeded in 2 usecs
[drm] ring test on 10 succeeded in 13 usecs
[drm] ring test on 11 succeeded in 12 usecs
[drm] ring test on 12 succeeded in 1 usecs
[drm] ring test on 13 succeeded in 22 usecs
[drm] ring test on 14 succeeded in 4 usecs
[drm] UVD and UVD ENC initialized successfully.
usb 3-2: New USB device found, idVendor=0403, idProduct=6001
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2: Product: FT232R USB UART
usb 3-2: Manufacturer: FTDI
usb 3-2: SerialNumber: A800fq8V
usb 1-13.3: new low-speed USB device number 3 using xhci_hcd
[drm] ring test on 15 succeeded in 32 usecs
[drm] ring test on 16 succeeded in 25 usecs
[drm] ring test on 17 succeeded in 24 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded
[drm] ib test on ring 1 succeeded
[drm] ib test on ring 2 succeeded
[drm] ib test on ring 3 succeeded
[drm] ib test on ring 4 succeeded
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] ib test on ring 8 succeeded
[drm] ib test on ring 9 succeeded
[drm] ib test on ring 10 succeeded
[drm] ib test on ring 11 succeeded
[drm] ib test on ring 12 succeeded
[drm] ib test on ring 13 succeeded
[drm] ib test on ring 14 succeeded
[drm] ib test on ring 15 succeeded
[drm] fb mappable at 0xC0E00000
[drm] vram apper at 0xC0000000
[drm] size 33177600
[drm] fb depth is 24
[drm] pitch is 15360
fbcon: amdgpudrmfb (fb0) is primary device
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
Console: switching to colour frame buffer device 480x135
amdgpu 0000:03:00.0: fb0: amdgpudrmfb frame buffer device
clocksource: Switched to clocksource tsc
amdgpu 0000:03:00.0: ring 0(gfx) uses VM inv eng 3 on hub 0
amdgpu 0000:03:00.0: ring 1(comp_1.0.0) uses VM inv eng 4 on hub 0
amdgpu 0000:03:00.0: ring 2(comp_1.1.0) uses VM inv eng 5 on hub 0
amdgpu 0000:03:00.0: ring 3(comp_1.2.0) uses VM inv eng 6 on hub 0
amdgpu 0000:03:00.0: ring 4(comp_1.3.0) uses VM inv eng 7 on hub 0
amdgpu 0000:03:00.0: ring 5(comp_1.0.1) uses VM inv eng 8 on hub 0
amdgpu 0000:03:00.0: ring 6(comp_1.1.1) uses VM inv eng 9 on hub 0
amdgpu 0000:03:00.0: ring 7(comp_1.2.1) uses VM inv eng 10 on hub 0
amdgpu 0000:03:00.0: ring 8(comp_1.3.1) uses VM inv eng 11 on hub 0
amdgpu 0000:03:00.0: ring 9(kiq_2.1.7) uses VM inv eng 12 on hub 0
amdgpu 0000:03:00.0: ring 10(sdma0) uses VM inv eng 3 on hub 1
amdgpu 0000:03:00.0: ring 11(sdma1) uses VM inv eng 4 on hub 1
amdgpu 0000:03:00.0: ring 12(uvd) uses VM inv eng 5 on hub 1
amdgpu 0000:03:00.0: ring 13(uvd_enc0) uses VM inv eng 6 on hub 1
amdgpu 0000:03:00.0: ring 14(uvd_enc1) uses VM inv eng 7 on hub 1
amdgpu 0000:03:00.0: ring 15(vce0) uses VM inv eng 8 on hub 1
amdgpu 0000:03:00.0: ring 16(vce1) uses VM inv eng 9 on hub 1
amdgpu 0000:03:00.0: ring 17(vce2) uses VM inv eng 10 on hub 1
amdgpu 0000:03:00.0: kfd not supported on this ASIC
[drm] Initialized amdgpu 3.21.0 20150101 for 0000:03:00.0 on minor 0
usb 1-13.3: New USB device found, idVendor=04f2, idProduct=0833
usb 1-13.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-13.3: Product: USB Keyboard
usb 1-13.3: Manufacturer: CHICONY
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.3/1-13.3:1.0/0003:04F2:0833.0001/input/input3
EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
hid-generic 0003:04F2:0833.0001: input,hidraw0: USB HID v1.11 Keyboard [CHICONY USB Keyboard] on usb-0000:00:14.0-13.3/input0
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.3/1-13.3:1.1/0003:04F2:0833.0002/input/input4
usb 1-13.4: new full-speed USB device number 4 using xhci_hcd
hid-generic 0003:04F2:0833.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [CHICONY USB Keyboard] on usb-0000:00:14.0-13.3/input1
ip_tables: (C) 2000-2006 Netfilter Core Team
usb 1-13.4: New USB device found, idVendor=1532, idProduct=0012
usb 1-13.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-13.4: Product: Razer Salmosa
usb 1-13.4: Manufacturer: Razer
input: Razer Razer Salmosa as /devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.4/1-13.4:1.0/0003:1532:0012.0003/input/input5
hid-generic 0003:1532:0012.0003: input,hidraw2: USB HID v1.11 Mouse [Razer Razer Salmosa] on usb-0000:00:14.0-13.4/input0
systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: apparmor.service: Cannot add dependency job, ignoring: Unit apparmor.service is masked.
systemd[1]: snapd.socket: Cannot add dependency job, ignoring: Unit snapd.socket is masked.
systemd[1]: snap-repair.timer: Cannot add dependency job, ignoring: Unit snap-repair.timer is masked.
systemd[1]: snapd.refresh.timer: Cannot add dependency job, ignoring: Unit snapd.refresh.timer is masked.
systemd[1]: snapd.core-fixup.service: Cannot add dependency job, ignoring: Unit snapd.core-fixup.service is masked.
systemd[1]: snapd.autoimport.service: Cannot add dependency job, ignoring: Unit snapd.autoimport.service is masked.
systemd[1]: snapd.service: Cannot add dependency job, ignoring: Unit snapd.service is masked.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
EXT4-fs (nvme0n1p2): re-mounted. Opts: errors=remount-ro
systemd-journald[349]: Received request to flush runtime journal from PID 1
Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCSP registered
Bluetooth: HCI UART protocol ATH3K registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Intel registered
Bluetooth: HCI UART protocol QCA registered
Bluetooth: HCI UART protocol AG6XX registered
Bluetooth: HCI UART protocol Marvell registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
random: crng init done
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input6
asus_wmi: Number of fans: 1
usbcore: registered new interface driver ftdi_sio
ftdi_sio 3-2:1.0: FTDI USB Serial Device converter detected
usb 3-2: Detected FT232RL
usb 3-2: FTDI USB Serial Device converter now attached to ttyUSB0
snd_hda_intel 0000:03:00.1: Handle vga_switcheroo audio client
RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input7
input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input8
input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input9
input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input10
input: HD-Audio Generic HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input11
input: HD-Audio Generic HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input12
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
kvm: disabled by bios
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain dram
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
EXT4-fs (sda): mounted filesystem with ordered data mode. Opts: (null)
[drm] HBRx4 pass VS=2, PE=1
[drm] {2560x1440, 2720x1481@241500Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] HBRx4 pass VS=2, PE=1
[drm] {2560x1440, 2720x1481@241500Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
xhci_hcd 0000:06:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
xhci_hcd 0000:06:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
xhci_hcd 0000:06:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
xhci_hcd 0000:06:00.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
warning: process `metro' used the deprecated sysctl system call with 10.1.
[drm] RBRx2 pass VS=1, PE=1
[drm] {1600x900, 1800x1000@108000Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] RBRx4 pass VS=1, PE=1
[drm] {1280x1024, 1688x1066@135000Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] RBRx4 pass VS=1, PE=1
[drm] {1600x1200, 2160x1250@162000Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] RBRx2 pass VS=1, PE=1
[drm] {1600x900, 1800x1000@108000Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] RBRx4 pass VS=1, PE=1
[drm] {1920x1080, 2200x1125@148500Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] RBRx4 pass VS=1, PE=1
[drm] {1920x1200, 2592x1245@193250Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] HBRx4 pass VS=2, PE=1
[drm] {2048x1280, 2784x1325@221277Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] HBRx4 pass VS=2, PE=1
[drm] {2560x1440, 2720x1481@241500Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] RBRx4 pass VS=1, PE=1
[drm] {1280x1024, 1688x1066@135000Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] RBRx4 pass VS=1, PE=1
[drm] {1600x1200, 2160x1250@162000Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] RBRx2 pass VS=1, PE=1
[drm] {1600x900, 1800x1000@108000Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] RBRx4 pass VS=1, PE=1
[drm] {1920x1080, 2200x1125@148500Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] RBRx4 pass VS=1, PE=1
[drm] {1920x1200, 2592x1245@193250Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] HBRx4 pass VS=2, PE=1
[drm] {2048x1280, 2784x1325@221277Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] HBRx4 pass VS=2, PE=1
[drm] {2560x1440, 2720x1481@241500Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] RBRx4 pass VS=1, PE=1
[drm] {1280x1024, 1688x1066@135000Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] RBRx4 pass VS=1, PE=1
[drm] {1600x1200, 2160x1250@162000Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] RBRx2 pass VS=1, PE=1
[drm] {1600x900, 1800x1000@108000Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] RBRx4 pass VS=1, PE=1
[drm] {1920x1080, 2200x1125@148500Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] RBRx4 pass VS=1, PE=1
[drm] {1920x1200, 2592x1245@193250Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] HBRx4 pass VS=2, PE=1
[drm] {2048x1280, 2784x1325@221277Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] HBRx4 pass VS=2, PE=1
[drm] {2560x1440, 2720x1481@241500Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] RBRx4 pass VS=1, PE=1
[drm] {1280x1024, 1688x1066@135000Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] RBRx4 pass VS=1, PE=1
[drm] {1600x1200, 2160x1250@162000Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] RBRx2 pass VS=1, PE=1
[drm] {1600x900, 1800x1000@108000Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] RBRx4 pass VS=1, PE=1
[drm] {1920x1080, 2200x1125@148500Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] RBRx4 pass VS=1, PE=1
[drm] {1920x1200, 2592x1245@193250Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] HBRx4 pass VS=2, PE=1
[drm] {2048x1280, 2784x1325@221277Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] HBRx4 pass VS=2, PE=1
[drm] {2560x1440, 2720x1481@241500Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] RBRx4 pass VS=1, PE=1
[drm] {1280x1024, 1688x1066@135000Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] RBRx4 pass VS=1, PE=1
[drm] {1600x1200, 2160x1250@162000Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
perf: interrupt took too long (2573 > 2500), lowering kernel.perf_event_max_sample_rate to 77500
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] RBRx4 pass VS=1, PE=1
[drm] {1920x1080, 2200x1125@148500Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] RBRx4 pass VS=1, PE=1
[drm] {1920x1200, 2592x1245@193250Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] HBRx4 pass VS=2, PE=1
[drm] {2048x1280, 2784x1325@221277Khz}
[drm] HBR2x4 pass VS=2, PE=1
[drm] {3840x2160, 4000x2222@533250Khz}
[drm] HBRx4 pass VS=2, PE=1
[drm] {2560x1440, 2720x1481@241500Khz}
[drm] HBR2x4 pass VS=2, PE=1